- BY
- POSTED IN blog
- WITH 0 COMMENTS
- PERMALINK
- STANDARD POST TYPE
When your home is damaged by water, you want to clean it quickly and make sure it doesn’t happen again. After all, your home is your safe haven, you don’t want it contaminated by pollutants, mold, and bacteria from flood water. To fix water damage in your home you need to identify the source, clear the standing water, dehumidify the remaining moisture, clean and sanitize all affected areas, and repair and restore any damage to flooring, walls, or other areas.
1. Identify Source
The first step to fixing water damage in your home is to identify the source of the water. In some cases, like broken plumbing or natural disaster, the source will be easily identifiable. However, in other cases the cause may be difficult to identify if it is behind a wall or ceiling. Once the source of water is identified you will need to take steps to remedy the problem and seal the leak.
Fixing plumbing, sealing fixture casing, or altering landscaping water flow channels may be all you need to remedy the situation. However, in some cases you will need a professional to identify and repair the source of unwanted water flow.
2. Clean Standing Water
The next step you need to take to fix water damage in your home is to clean any standing water. In most water damage situations there are pools of water in low lying areas. In some cases you can use a common wet/dry vacuum to remove water, mud, or other debris from flooding. However more severe flooding cases require industrial water extractors to handle the volume and density of polluted water.
3. Dehumidify
After standing water has been removed you will need to dehumidify the remaining moisture. This is one of the most important steps you need to take to fix water damage in your home or office. Residual moisture can cause warping and other property damage as well as lead to serious health issues like the formation of mold, bacteria, and other contaminants.
Dehumidification removes hidden moisture to eliminate the possibility of further damage occurring once the primary water has been removed.
4. Clean and Sanitize
After the water and moisture have been removed the next step to fix water damage is to clean and sanitize the impacted areas. Flood water often brings sewage and other pollutants with it. These contaminants must be removed before final repairs are conducted. Commercial cleaners and industrial sanitizers will ensure that your property is effectively cleaned and treated.
5. Repair and Restore
The final step in fixing water damage is repair and restoration. Any flooring or carpeting that was damaged must be cleaned or replaced. Damaged walls may need to have sections replaced or repainted.
Call a Professional
The best way to ensure all five of these steps are followed is to call a professional. Vital Restoration is the best water damage specialist in the Bay area. Their trained experts will identify the source of water, clear the standing water, dehumidify, clean and sanitize, and restore your property. When you need to fix water damage in your home call a professional, call Vital Restoration.